Windows password Hacking with USB

So do you want to hack any windows account or are you not allowed to sit on
computer as you don't know administrator password now it is time to hack it.


Features:-
1. Can be completed in 5 min.

2. Works 100%.

3.Works from windows 95 to windows 7. (Not have been tested in windows 8).

4. Easy interface.


Just follow this simple guide to hack password of any windows operating system in only 5 min...

1. Download Password & Registry Hacker.

2. Uncompress it and Copy all files given in folder to the USB drive. It cannot be in a subdirectory on the drive.
    You do not need delete files already on the drive.

3. Install the boot loader (you may have to be administrator) On the USB drive, there should now be a file "syslinux.exe".

4. Run this from a command line (cmd), like this:
       
               j:\syslinux.exe -ma j:

replace j with some other letter if your USB drive is on another
drive letter than j:

5. After you have build this bootable pendrive . Insert it and reboot the target system. Now boot the computer using a usb drive. If you see this screen, press ENTER to continue. Otherwise, you have done something wrong. If the computer still boots from Windows, you have to check boot ordering in BIOS whether it is configured to boot from usb or not.

6. Once the program has been loaded, you see Step ONE which you have to select which partition that has Windows installed. In most cases, there will be only one partition so you can use the default value shown in the bracket ([1]), which refers to the first partition, by press Enter to continue.
Note for Windows 7: You have to select a partition next to the partition that has 100 MB size and labeled as “BOOT” . This example, the computer is Windows 7 so I have to select a second partition by type “2” as in the figure below and press Enter to continue. If you leave with the default value, it will not work.

7. On Step TWO, you have to specify path to Windows registry. In most cases, you can leave it as default path as Windows/System32/Config by press Enter. But if you installed Windows on other path, for example, C:\WinXP, you have to enter WinXP/System32/Config instead.

8. Next, select which part of registry to load, press Enter to leave it as default option which is Password reset [sam system security].

9. On chntpw Main Interactive Menu, press Enter to select Edit user data and passwords option.

10. On chntpw Edit User Info & Passwords, you can select which account that you want to reset password. By default, it is Administrator. But in this example, I want to reset password of “Win7” account so I type the account name and press Enter..

11. On User Edit Menu, type “1” and press Enter to select Clear (blank) user password.

12. If there is nothing wrong, you should see a message Password clear! as in the figure below. Then, type “!” and press Enter to select quit option.
Note: This doesn't mean that the password has already been cleared. You will have to confirm changes to the system in later step.

13. On chntpw Main Interactive Menu, type “q” and press Enter to quit the program.

14. On Writing back changes, type “y” and press Enter to confirm any changes you made in above steps.

15. You will see “EDIT COMPLETE” message which indicates that the password has been cleared successfully. Press Enter to exit the program.

16. And now restart your PC and remove your usb now your selected account will not have any password.

             So download it now and enjoy......... images taken from linglom

It is some what hard to download due to the survey lock but you really know what you are getting so download Password & Registry Hacker  Now...

I will surely reply your comments so comment here....

If you like this post than pleas share it .(Buttons are given in left side)