Today I am going to Show you how to create a bootable pendrive to install windows 7 in any PC...
Windows 7 is on of the most popular windows operating system of this time. Most of people all over the world are using windows 7. Its installation requires a DVD reader as it comes in a DVD.
Due to this many of the peoples who don't have DVD reader find it hard to install windows 7 in there PC. Installation of windows 7 usually takes 30 min to install but now all this limitations are going to vanish as by using this Trick you will be able to create a bootable Pendrive which will install windows 7 in 10 to 15 min in every computer even those which don't have DVD reader...
So first Of all lets see what you will need :-
1. A computer with windows 7 or 8 already installed. (For creating bootable pendrive)
2. A Pendrive of minimum 4 GB space.
3. A windows 7 bootable installation DVD.
4. Some Extra Time to create this Pendrive.
Now when you are confident that you have all required things now you can start this process..
1. Insert your pendrive into Computer.
2. Go to start Run and then type cmd and run it in administrator mode.
3. Type following commands in cmd.
DISKPART
LIST DISK
It will display all your Hard disk and usb Here note the number given to your USB let it be 2 here
SELECT DISK 2 (replace 2 with your shown no.)
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 2
ACTIVE
FORMAT FS=NTFS
Wait for formating to get completed then
ASSIGN
EXIT
(See this image for Help)
4. Now minimize the cmd and insert windows 7 DVD and note the drive latter.
5. Them restore the cmd and type following commands...
F:CD BOOT where f is the drive latter of you DVD (Replace it)
CD BOOT
BOOTSECT.EXE /NT60 H: where h is your drive latter.
6. Now copy whole of the windows 7 DVD into the pendrive without creating any folder in pendrive.
It should be just as they are looking in DVD.
7. Now your USB is ready to BOOT.
8. Just configure your BIOS correctly to boot from USB and install windows 7 as you install it from DVD.
2. Go to start Run and then type cmd and run it in administrator mode.
3. Type following commands in cmd.
DISKPART
LIST DISK
It will display all your Hard disk and usb Here note the number given to your USB let it be 2 here
SELECT DISK 2 (replace 2 with your shown no.)
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 2
ACTIVE
FORMAT FS=NTFS
Wait for formating to get completed then
ASSIGN
EXIT
4. Now minimize the cmd and insert windows 7 DVD and note the drive latter.
5. Them restore the cmd and type following commands...
F:CD BOOT where f is the drive latter of you DVD (Replace it)
CD BOOT
BOOTSECT.EXE /NT60 H: where h is your drive latter.
6. Now copy whole of the windows 7 DVD into the pendrive without creating any folder in pendrive.
It should be just as they are looking in DVD.
7. Now your USB is ready to BOOT.
8. Just configure your BIOS correctly to boot from USB and install windows 7 as you install it from DVD.
No comments :
Post a Comment